Honda All New Amaze 2018 Manual, Page 90

uuGauges and Information DisplayuInformation Display
88
Instrument Panel
Shows the outside temperature in Celsius.
If the outside temperature has been below 3°C at the time you set the power mode
to ON, the outside temperature indicator blinks for 10 seconds.
■ Adjusting the outside temperature display
Adjust the temperature reading up to ±3ºC if the temperature reading seems
incorrect.
1. Set the power mode to ON.
2. Press and hold the TRIP knob for 10 seconds or more.
u The following sequence appears for 1 second each: 0, 1, 2, 3, -3, -2, -1, 0
3. When it reaches the desired value, release the TRIP knob.
u The new outside temperature is now entered.
■
Outside Temperature
*
1Outside Temperature
*
The temperature sensor is in the front bumper. Road
heat and exhaust from another vehicle can affect the
temperature reading when your vehicle speed is less
than 30 km/h.
It may take several minutes for the display to be
updated after the temperature reading has stabilised.
* Not available on all models
2UA_Manual_ 30-03-18.indd 91 4/5/2018 3:04:39 PM