Honda All New Amaze 2018 Manual, Page 288

uuIf a Tyre Goes FlatuChanging a Flat Tyre
286
Handling the Unexpected
1. Place the jack under the jacking point
closest to the tyre to be changed.
2. Turn the end bracket clockwise as shown in
the image until the top of the jack contacts
the jacking point.
u Make sure that the jacking point tab is
resting in the jack notch.
■
How to Set Up the Jack
1How to Set Up the Jack
WARNING: The jack shall be placed on a flat and
stable surface on the same level as the vehicle is
parked.
3
WARNING
The vehicle can easily roll off the jack,
seriously injuring anyone underneath.
Follow the directions for changing a tyre
exactly, and no person should place any
portion of their body under a vehicle that is
supported by a jack.
Jacking Points
Jacking Points
2UA_Manual_ 30-03-18.indd 289 4/5/2018 3:05:40 PM