Olympus Digital Camera SP-560UZ Instruction Manual and Quick Start Guide, Page 19
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
EN 19
Button operations
Press 4& in shooting mode to select the macro mode.
Press o to set.
• Some items cannot be set depending on the position of the mode dial.
g “Functions available in shooting modes and scene modes” (P.73)
• Some items cannot be set depending on the position of the mode dial.
g “Functions available in shooting modes and scene modes” (P.73)
Press # (Flash pop-up) in shooting mode to open the flash. Then press 3# to select the flash
mode. The settings cannot be made if the flash is not popped up.
g“# button
Flash pop-up
” (P.17)
Press o to set.
• Some items cannot be set depending on the position of the mode dial.
g “Functions available in shooting modes and scene modes” (P.73)
c 4& button
Shooting pictures close to the subject (Macro)
OFF Macro mode is deactivated.
& (Macro mode) Allows you to shoot from as close as 10 cm/3.94 in. (when the zoom
is set for the zoom-out angle) to your subject.
% (Super macro mode) Allows you to shoot from as close as 1 cm/0.39 in. to your subject.
d 1 F button
Changing picture brightness(Exposure compensation)
Press 1 F in shooting mode, set using 43 then press o.
• Adjustable from -2.0 EV to +2.0 EV.
3 : Brighten.
4 : Darken.
Activate the setting contents.
e 3# button
Flash shooting
AUTO (Auto-flash) The flash fires automatically in low light or backlight conditions.
!(Red-eye reduction flash) This emits pre-flashes to reduce the occurrence of red-eye in
your pictures.
#(Fill-in flash) The flash fires regardless of the available light.
H(Red-eye fill-in flash) The flash always fires after pre-flashes for red-eye reduction are
emitted.
#SLOW The flash fires with slow shutter speed. Set the flash timing in
[#SYNCRO]. g“#SYNCRO
Selecting the flash timing
” (P.30)
$(Flash off) The flash does not fire.
o
se to the subject (Macro)
i
ghtness(Exposure compensation)
[ ]
P
F8.0
F8.0
1/1000
1/1000
OK
+2.0
+2.0
SET
d4355_e_unified_forU-Print_00_bookfile.book Page 19 Thursday, July 12, 2007 11:01 AM